lørdag den 31. maj 2014

Kromlech initial thoughts and why you shouldn't be like me

13.11 Posted by Unknown , No comments
With all this excitement about the coming Ork release, it is only fitting, that we have 4 kromlech reviews coming!

Initial thoughts:
I am an idiot. Dont be me, dont be an idiot; do remember to clean the resin, before trying to glue and paint...

Kromlech miniatures has tons of soul

Kromlech produces great sculpts

More info in the coming reviews.

tirsdag den 27. maj 2014

søndag den 25. maj 2014

Review: The Army Painter Warpaint/inks and colour primers

13.37 Posted by Unknown , No comments
In this review, we'll take a look at the paint range from the Danish company The Army Painter. They were kind enough to send me some samples to test out, so a big -Thank You- to them.




The Army Painter has a pretty small selection of paints and shades, numbering about 42(geek points right there), which makes perfect sense considering the approach the company has to painting and their system of painting.
In a previous review I covered the Quickshade part of that system, but just to recap; the point of the paint system is that you paint on some base colours, dip in Quickshade, base and be done with it.


Regardless of that, the range of colours is pretty solid and for most projects you won't miss many nuances of colours.
They do however, have a nifty little guide to mixing paints and the resulting colours which is a nice touch. The guide is pretty limited though and a few extra shades would have nice.


The paints comes in 18 ml dropper bottles, which I find extremely handy and the lids are colour coded, which makes it easy to distinguish metalics(black Lid)  from regular paints(white lid) and inks/washes(red lid).
They do need a good shake however, as some of the paints have a tendency to seperate a bit.




Coverage
In general the warpaints cover quite nicely, but seem a bit more opaque than other brands of paints. That aside, they do cover very well in a few coats and thin nicely.
As you might know, red, green and yellow can be somewhat problematic colours with regards to coverage, but in recent years most of the competition have made great strides in making them much easier to use with excellent coverage even on a black undercoat. Dont expect such performance from the warpaints though.
To get a good red, it takes several layers and a light undercoat. I tried painting red on a black undercoat, and after 4 layers(thinned) I still wasn't happy with the result.
Be prepared to prep before painting red
What I did instead, was using “Uniform grey” as a basecoat and the result was very pleasing. The reds are intense and I especially love the “Chaotic red”, which is a very dark, brownish red. Throw in a drop of “Oak Brown” and a drop of “Dragon Red” and you got the perfect colour for painting Blood Ravens.
Green and yellow can be problematic too,but using either a white or grey undercoat they do cover decently though not as well as the other colours in the range. They do produce very pleasing results, as the ork below shows, just remember to use a lighter undercoat.

Greenskin for greenskins

All in all, I really like the paints and the resulting sharp and vibrant colours.




Colours, colours everywhere
As said before, the range is pretty small compared to other brands, but they do cover all the bases and excel in some areas.
The metallics are very smooth, cover well and are a plain joy to use. They are pretty limited however, with 3 shades of steel, 1 gold and 1 bronze, leaving all the shades of gold and bronze up to your mixing skills.
The Warpaint range includes 7 inks(Picture below) and they are all fantastic to work with!
They seem to be less messy than the GW shades while producing better result when dry. I cant quite pinpoint the reason, but the surface tension seems to be higher compared to GW shade, which might have something to do with it.
The Dark tone ink resembles the old Devlan mud and is one of the best and most versatile inks in the box. Strong tone is more like Nuln oil, very black and soft tone is perfect for those subtle shadows.
I am painting a small Ork army atm in which case I use about three different inks on a single model; strong, dark and green tone inks and they have performed perfectly.
The other tones of inks work great too, if you need a specific colour af shades.
All in all it is a great range of inks on par and in some cases better, than what you might know from GW, which is no mean feat, since The Army Painter inks are considerably cheaper.
My only complaint is that there is no ink for fleshtones, which is a strange omission, considering the otherwise impressive range.
Painted using only warpaint



Spraying the spray
Armypainter has built up quite a reputation for the colored primers and covers a wide range of colors.
Armypainter was kind enough to send a couple of those my way; Leather brown, Angel Green and Plate Mail metal.
Leather brown

The trick of the colour primers is that they are a 100% color match to the warpaints range. Naturally I had to test that claim and primed up some Doom Eagles scouts and bikes(Plate Mail metal) and some Orks(Leather brown). The spray was easy to use, covered well without obscuring detail and when painting up the models the 100% match claim turned out to be 100% true.
Of course, if you own an airbrush you wont need colored primers, but for the rest of us, they are great timesavers.
Platemail Metal



Summing it up
When all is said and done The Army Painter has a great range of paints, especially if you use their system of applying base colours and dipping, but even if you hate dipping with a passion, their warpaints are still a great buy.


I have worked extensively with the warpaints, inks and primers and it has been a joy. They do act sligthly different than GW paints, but not worse, just different.
In my humble opinion The Army Painter has struck a near perfect balance between quality, options and cost, the paints are great, the price is even greater and the range is decent.


Each warpaint cost 2.5 Euro/2.99 Dollars and they have some great prices on a mega paint set, which gives you all the warpaints and inks.
When painting loads of these guys, price matter;-)


Please let me know, if you liked the review and if you want some specific informations about the warpaints.


You can buy the paints directly from The Army Painter

lørdag den 24. maj 2014

Review: Army Painter Quickshade or Armies in a can

Here it is folks, or at least the first part of what will be a series of reviews focusing on different products and aspects of The Army Painter paints, Quickshade and inks line.

This part will focus on the quickshade made for dipping your minis and get an army on the table fast and with  minimum amount of work.
The process is called dipping and is nothing new for some of the veterans out there, who have been dipping minis since the dawn of times(or so I have been told).
The technique is extremely simple, you just paint the base colours on the model, Army Painter has a wide assortment of coloured primers to help you with that, and then you dip the model in quickshade, throw off any excess and leave the mini to dry and spray some matt varnish over it, to dull it down.

All in all, an extremely simple and fast technique.

What is quickshade?
The Army Painter quickshade focusses on being easy to use and giving great results with minimal effort and time.
For the most part it even succeeds in doing just that.
Quickshade comes in three shades(Soft, Strong and Dark) and is not water soluble, but can be thinned with turpentine. The can should hold enough content to dip about 200 miniatures, give or take.
As I said there are 3 different tones of Quickshade and I used the strong tone for my review, which Army Painter claims is the most popular of their “dips”.
Each can cost about 25 euro or your regional variant.


How to use quickshade?
The point of dipping is speed, and the way to achieve that is to skip a lot of the steps, we normally associate with painting.
You simply paint the mini in the base colours, dip, apply a matt coat of varnish, base the figure and call it a day.
The process of dipping is pretty simple, but require a bit of practice to get perfect. 
Army Painter recommends that you dip the mini, then throw of the excess quickshade.
Sounds simple enough, but I managed to break a base and throw a poor ork across my yard, when dipping the first time. I still can't find his head, which he is pretty upset about.

Practice did make perfect though, and soon I was dipping like a pro.
It sounds messy, because it is, and if you want to dip indoors, I would recommend you to brush the quickshade on the mini, which also gives you more control and less waste



Who is Quickshade for?
I love this hobby, from painting to gaming and all the other aspects and I must admit I did find it a bit violating not trying the hardest I could, when painting the minis.
On the other hand, I hate nothing more than playing with or against an unpainted army and the constant excuses from opponents, who just can't seem to finish their damned armies…
So there definitely is a place for a product like quickshade, either as a way to get a decently painted (and I do find the dipped miniatures decently painted) army on the table fast and/or if you are doing a horde amy like orks, Atra militarium or tyranids.
If you are pressed for time or simply lack an interest for the painting side of the hobby, Quickshade or any dipping is perfect for you.
Personally I am going to start an Ork army and I have neither the time, nor the inclination to paint that many boyz, so for the horde armies out there Quickshade should work very well too.



Does it work?
In one word; Yes. 
Quickshade works well for what it is intended to do and I was actually pretty impressed with it. The ease of use, once you get the hang on how to apply it, is incredible and the result is great.
It won't win you any painting competitions, but most of us just want to field an army that looks great and quickshade will certainly help you with that.
As the pictures hopefully will show, the end result is quite good, even considering it is my first try at dipping.
I do feel however, that it works better with more organic models like orks and tyranids, or models with some cloth, like your regular guards.
Space marines on the other hand, I am not too sure about that, but that might just be my personal preference, as I think they look too dirty.

The process is quick, easy and with a very decent result. Throw in a few highlights, and you will have an army that looks great on the table.

When all is said and done Quickshade does what it says on the tin and it gets the job done.
A solid 4 out of 5.



I really hope you like the review and that people in general will support the effort.